Precisa

This guide provides step-by-step instructions on configuring Precisa weighing devices for seamless integration with CompuTec PDC. It covers tested devices, device settings, and necessary configurations within CompuTec Gateway Manager.

Tested Devices

The following Precisa models have been tested and confirmed to work with CompuTec PDC:

• Precisa XB320M
• Precisa BK1200D
• Precisa XB120A

Device Configuration

To ensure proper communication between the scale and CompuTec PDC, adjust the following settings on the device:

Print Format

• Date and Time ON
• Balance-ID ON
• Product-ID ON
• Gross and Tare ON
• Units ON
• Operator-ID OFF
• Line Feed OFF

Set Interface

• BaudRate 9600
• Parity 8-NO-1Stop
• Handshake NO
• PC Direct Mode OFF

Set Date And Time

• Date [DD.MM.YY]

Configuration in CompuTec Gateway Manager

To integrate the Precisa scale with CompuTec PDC, configure the following parameters in CompuTec Gateway Manager:

• Scale name: for example, “Precisa XB320M”
• Localization: for example “MG11”
• Barcode: for example “123456”
• Tolerance: format NUMBER[UoM] for example 0.001g
• Range From: format NUMBER[UoM] for example 0.2g
• Range To: format NUMBER[UoM] for example 300g
• Session Life Time (s): left default 900
• Port: the same as the device
• Parity: the same as the device
• BaudRate: the same as the device
• Handshake: the same as the device
• Data bits: the same as the device
• Stop bits: the same as the device

Regular Expression

Date\s*(?<DATE>[0-9]{1,2}.[0-9]{1,2}.[0-9]{4})\s*Time\s*(?<TIME>[0-9]{1,2}:[0-9]{1,2}:[0-9]{1,2}).*Serialno\s*:\s*(?<SerialNO>\d*).*N\s*:\s*[a-zA-Z]*\s*(?<minus>[-+]*)\s*[a-zA-Z]*\s*(?<NetWeight>[0-9.]*)\s*(?<Uom>(?![GT])[a-zA-Z]{1,2}).*G\s*:\s*[a-zA-Z]*\s*[-+]*\s*[a-zA-Z]*\s*(?<GrossWeight>[0-9.]*).*T\s*:\s*[a-zA-Z]*\s*[-+]*\s*[a-zA-Z]*\s*(?<Tare>[0-9.]*)

---